Tsugami BS26C Model III

$79,900

Contact our CNC experts to get the history, condition and location (844) 262-6789 or email [email protected]

SKU: 2740 Categories: , ,

Description

Tsugami BS26C Model III [2006]

Specifications for the Tsugami BS26C Model III:

Sub-Spindle Maximum Diameter    1.02″
Sub-Spindle Maximum Drill Capacity, Mild Steel    5/16″
Sub-Spindle Maximum Tap Capacity, Mild Steel    1/4″
Speed Range (Serial Interface)    200 – 4,000 RPM
Power Rating    1.5 HP AC
Sub Spindle Indexing    15 Degree Increment
Part Ejection    Front or Rear by Arrangement
Maximum Bar Diameter    1.02″
Z1-Axis Travel    8.21″
“Z2″ ID Tool Slide In and Out    7.88″
Speed Range of Main Spindle    200 – 6300 RPM
Horsepower of Main Spindle    7.5 HP
Driven Tool Drive Motor Rating    5/8 HP
Maximum Speed Cross Tool T10    4,000 RPM (High Speed)
Maximum Speed Cross Tool T11    2,400 RPM (High Torque)
Maximum Speed Cross Tool T12    2,826 RPM (High Torque)
Offset from Guide Bushing T10 & T11    0.472″ (.397 Max Shank)
Offset from Guide Bushing T12    0.965″ (.511 Max Shank)
Spindle Center Height    39.37″
Spindle Index Increment    5 Degrees
Spindle Center Height    39.37″
Spindle Index Increment    5 Degrees
Dimensions    72″ W x 46″ W x 67″ H
Approximate Weight    5,500 lbs
Number of Tool Stations
7 OD Tools
4 ID Tools (2 Live, 2 Fixed)
3 ID/OD Backworking Tools
3 Cross Driven Tools
Tooling Sizes
Turning    5/8″ Square
ID    1″ Round ESX-16
Backworking    5/8” Round ESX-16
Driven Tools    (2) ESX-16, (1) ESX-20 Collet

Equipped with:

IEMCA Boss 332F Bar Feeder
REM Model 2400 Mister
Power on hours  27425
Operating Time  6366
Cutting Time  13587

Product Auto ID: 2740

EMAIL QUOTE

INSTANT QUOTE!

Get Instant Quote in less than 1 Minute.

  • This field is for validation purposes and should be left unchanged.

NEED FUNDING?

Get Funding in less than 10 Minutes.

  • This field is for validation purposes and should be left unchanged.

WANT MORE PHOTOS?

Get More Photos in less than 30 Seconds.

  • This field is for validation purposes and should be left unchanged.
CLICK TO CALL