Used Okuma

Okuma CNC History Guide [1980 – 2018]

CNCMachines.Net is a used Okuma CNC machine expert.
See below and compare over 30 years Okuma makes and models.

OKUMA CNC LATHE

OKUMA LB SERIES: (Single Spindle Design)

Okuma CNC Lathes during 1980’s – 1990’s

  • Okuma LB10
  • Okuma LB25
  • Okuma LB35
  • Okuma LB35-M
  • Okuma LB35-MY
  • Okuma LB45
  • Okuma LB45-M
  • Okuma LB45-MY
  • Okuma LC50
  • Okuma LC20
  • Okuma LC30
  • Okuma LCC15H
  • Okuma LCC15-2S
  • Okuma LT15
  • Okuma LT10
  • Okuma LAW1S/2S
  • Okuma Crown-E
  • Okuma Crown L1420

Okuma CNC Lathes During the 2000’s – Current

OKUMA GENOS Series

The Okuma Genos series is the entry level Okuma CNC lathe build on a sold cast iron base. You can see the different sizes below and choose between 2 and 3 axis design.

  • Okuma Genos L200E-M: 8″ Chuck, 11.81″ Max Diameter, 14.96″ Max Length
  • Okuma Genos L200-MY: 8″ Chuck, 7.87″ Max Diameter, 14.96″ Max Length 5 Axis Live Tooling, Y Axis
  • Okuma Genos L250: 10″ Chuck, 8.27″ Max Diameter, 11.42″ Max Length
  • Okuma Genos L250E: 10″ Chuck, 11.81″ Max Diameter, 11.42″ Max Length
  • Okuma Genos L250-M: 10″ Chuck, 8.27″ Max Diameter, 11.42″ Max Length with 3 Axis Live Tooling
  • Okuma Genos L300: 12″ Chuck, 12.2″ Max Diameter, 19.7″ Max Length
  • Okuma Genos L300-M: 12″ Chuck, 11.2″ Max Diameter, 17.1″ Max Length with 3 Axis Live Tooling
  • Okuma Genos L300-MY: 12″ Chuck, 11.2″ Max Diameter, 17.1″ Max Length with 5 Axis Live Tooling and Y Axis
  • Okuma Genos L300-MYW: 12″ Chuck, 11.2″ Max Diameter, 17.1″ Max Length with 5 Axis Sub Spindle, Live Tooling and Y Axis
  • Okuma Genos L400: 15″ Chuck, 12.2″ Max Diameter, 19.7″ Max Length
  • Okuma Genos L400E: 15″ Chuck, 12.2″ Max Diameter, 43.1″ Max Length

OKUMA HJ Series:

The Okuma HJ series is the Genos with a few upgrades.
With a horizontal way system and hand scraped headstock system offers more rigidity and accuracy.

  • Okuma HJ E250: 10″ Chuck, 11.81″ Max Diameter, 11.42″ Max Length
  • Okuma HJ E400: 12″ Chuck, 16.81″ Max Diameter, 19.2″ Max Length

OKUMA LB EX Series:

  • Okuma LB2000-EX: 8″ Chuck, 16.93″ Max Diameter, 11.81″ Max Length
  • Okuma LB2000-EX-II: 8″ Chuck, 16.93″ Max Diameter, 11.81″ Max Length
  • Okuma LB2500-EX: 10″ Chuck, 16.1″ Max Diameter, 15.42″ Max Length
  • Okuma LB3000-EX: 12″ Chuck, 16.1″ Max Diameter, 19.7″ Max Length
  • Okuma LB4000-EX: 15″ Chuck, 18.9″ Max Diameter, 29.1″ Max Length
  • Okuma LB35III: 12″ Chuck, 16.93″ Max Diameter, 23.7″ Max Length or More
  • Okuma LB45III: 15″ Chuck, 25.3″ Max Diameter, 29.5″ Max Length or More

OKUMA LT EX Series:

The Okuma LT EX series is top of the line twin spindle with twin turret design for production CNC. The upper and lower turret design allows both spindles to be cutting at the same time.
This maximizes production while also allowing a third turret option to be included which increases both production and headache for the programmer.

  • OKUMA LT2000 EX: 8″ Chuck, 8.27″ Max Diameter, 11.81″ Max Length Up to 12 Axis available
  • OKUMA LT3000 EX: 10″ Chuck, 13.27″ Max Diameter, 19.81″ Max Length Up to 12 Axis available

OKUMA SPACE TURN Series:

  • Okuma Space Turn LB300
  • Okuma Space Turn LB400

OKUMA TWIN SPINDLE CNC LATHES from 1990’s – Current:

  • Okuma LU15
  • Okuma LU25
  • Okuma LU25M
  • Okuma LU300
  • Okuma LU45
  • Okuma LU35
  • Okuma Macturn250
  • Okuma Macturn350
  • Okuma Macturn550

OKUMA VTL:

  • Okuma V40-R
  • Okuma V60-R
  • Okuma V80-R
  • Okuma V100-R
  • Okuma VTC65

OKUMA CNC FLAT-BED LATHES:

  • Okuma LH-35N
  • Okuma LH55-N

OKUMA CNC VERTICAL MACHINING CENTER

  • Okuma Cadet-Mate
  • Okuma MX45VAE
  • Okuma MC40A
  • Okuma MC50VA
  • Okuma MC60VA
  • Okuma MC60VAE
  • Okuma MX45VB
  • Okuma MX55A/B
  • Okuma MC40VA
  • Okuma MC40VB
  • Okuma MCV4020
  • Okuma MB46V
  • Okuma MB56V
  • Okuma MB66V
  • Okuma MU400V
  • Okuma MU500V
  • Okuma MA550V
  • Okuma MA650V
  • Okuma Millac 44V
  • Okuma Millac 468V
  • Okuma Millac 561C
  • Okuma Millac 611V
  • Okuma Millac 761V
  • Okuma Millac 852V
  • Okuma Millac 1052V

OKUMA CNC HORIZONTAL MACHINING CENTER

  • Okuma MA400HA
  • Okuma MC500H
  • Okuma MC600H
  • Okuma MA400H
  • Okuma MA500H
  • Okuma MA600H
  • Okuma MA800H
  • Okuma MB4000H
  • Okuma MB5000H
  • Okuma MB8000H
  • Okuma Millac 44H
  • Okuma Millac 550H
  • Okuma Millac 630H
  • Okuma Millac 800VH
  • Okuma Millac 1000VH
  • Okuma MX40HA
  • Okuma MX50HB
  • Okuma MX60HB
  • Okuma MC800H

OPTIONS for Okuma CNC Horizontal Machining Centers

  • 1 Degree is Standard, full 4th Axis Option
  • 20 ATC is Standard, 40,60,80,100,120,160 is an option.
  • Flood Coolant is Standard, Thru Spindle Coolant is an option 300 and 1000 PSI
  • Standard RPM is 7,000, 10,000 12,000 and 15,000 is an option.
  • Probe System are Options.
  • 2 Pallet Standard, 6 Pallets or More is an Option.